FOG/ SMOKE MACHINES

V-925 FOGGER
1. Carries U.L., C.U.L., and TUV/GS safety approval, as well as conforms to E.E.C product safety standard of
“EN-60335”
2. High quality German thermostat.
3. High-pressure piston pump.
4. Applications: Rentals, Home Parties, Smaller Stages & Dance Floors, Light Effects
 

INSTRUCTIONS FOR THE V-925 FOG MACHINE
1. Insert remote control into rear of machine.
2. To avoid risk of electric shock, insert line cord plug into grounded outlet only. (Indicator light on the remote controller will come on)
3. Fill reservoir with water based Fog Fluid. Use FJ-1 or FJ-1Q ONLY
4. Close cap tightly. Push clear plastic feeder tube down through the cap (if there is slack).
5. When indicator light on the remote controller goes off, the machine is ready for use.
6. At times the indicator light will come on. This is NORMAL, the machine is simply recycling. Depress the switch only when light is OFF.
7. Allow fog machine to “COOL DOWN” before packing for transportation.

IMPORTANT
ALWAYS MAKE SURE THAT THERE IS ENOUGH FOG FLUID IN THE TANK BEFORE TURNING THE FOG MACHINE ON. ACTIVATING THE PUMP WITHOUT FLUID CAN CAUSE DAMAGE TO THE PUMP AND HEAT CORE.

CAUTION
VAPOR FROM THIS FLUID MAY BE IRRITATING TO SOME PERSONS WITH ALLERGIC SENSITIVITY. DO NOT EXPOSE AT CLOSE RANGE TO KNOWN ASTHMATIC. USE IN A WELL-VENTILATED AREA. TO AVOID INJURY FROM HOT STEAM- KEEP AWAY FROM NOZZLE AT LEAST TWO FEET.

CLEANING
TO INSURE PROPER CARE AND A TROUBLE FREE LIFE FOR YOUR FOG MACHINE, USE THE FOLLOWING FORMULA . 8-12 OZ. OF DISTILLED WATER AND 2 TABLESPOON OF WHITE VINEGAR EVERY 2- 4 WEEKS. ( DEPENDING ON FREQUENCY OF USE.) THIS SHOULD ALLOW FOR A THOROUGH STEAM CLEANSING. FOLLOW THE SAME INSTRUCTIONS AS WITH THE FOG FLUID, KEEP THE BUTTON DEPRESSED FOR 15-30 SECONDS.
REPEAT PROCEDURE USING PLAIN WATER TO FLUSH ANY TRACES OF VINEGAR.

 

BACK